|
CleanZone
CleanZone Premier is a high performance contamination control zone
designed to attract, collect and retain contamination, preventing
particles and microbes from getting into your critical areas. Dycem
CleanZone is available in a range of attractive designs which means it
still looks good between wet cleaning. Suitable for light wheeled
traffic and heavier pedestrian flows. Available in a range of fixed
mats or floor coverings to suit the needs of your facilities.
Permanently installed, it is the most effective way of controlling all
forms of foot borne and wheel borne contamination.
|
Benefits
• Prevents over 99% of contamination from entering your critical area
• Improved quality of working life due to reduced allergens in the atmosphere
• Reduced floor and air particle / microbial counts
• Improved yield, cost savings and profitability
• Reduced risk of high product rejection rates
• Cannot be bypassed and requires no overt action
|
|
Benefits
• Provides all the benefits of CleanZone, with increased load resistance of 1250 lbs/in2
|
WorkZone
WorkZone Premier has been specially
designed to remove contamination from areas subject to heavy wheeled
traffic. It effectively attracts, collects and retains contamination
from the wheels of forklifts, pallet trucks, large trolleys and carts,
preventing particles and microbes from getting into your critical areas. |
|
|
Size
Contamination on feet and wheels comes in multiple layers and varying sizes, requiring multiple steps for complete decontamination.
Effective decontamination needs at least six footfalls, three for each foot, or three full wheel rotations.
High Performance Contamination Control Zones are sized to allow for full decontamination whatever the traffic flow.
|
 |
Suppleness
CleanZone and WorkZone’s soft, supple surface conforms to the shoe or wheel allowing contact with smaller particles that would otherwise be bridged by larger particles.
This also allows a dense packing of particles so the surface remains effective even after continuous overstrikes in the same area.
|
|
Smoothness
CleanZone and WorkZone’s exceptionally smooth surface creates a natural tack and a high degree of short-range electromagnetic forces (Van der Waals).
This enables it to attract, collect and retain over 99% of particles, ranging from over 100 microns to less than 0.2 microns.
This contamination is held on the surface until cleaned off.
|
|
Use CleanZone wherever contamination is a
concern: entrances and exits to critical areas, changing rooms,
transfer hatches, corridors and airlocks.
Ancare's
comprehensive range of High Performance Contamination Control Zones
reduce particulate counts in all your critical areas.
 |
All critical areas to prevent ingress of contamination |
|
All exits to prevent contamination leaving the critical area. |
|
In corridors to prevent cross contamination. |
|
Inside the critical area adjacent to critical products and processes. |
|
Airlocks |
|
Gowning rooms |
|
Product transfer rooms |
|